Yamaha is proud to offer Infinity's complete wake tower sound system. The system includes 1 pair of wake tower speakers, microphone/ control head to use the speakers as a PA system and an Infinity 150 Watt RMS (2 ohm) amplifier. Features include: Tower Speaker Set. Watertight enclosures withstand salt-spray and UV. Power handling: RMS, 100 watts, 300 watts Peak. Aluminum mounting bracket fits bars from 1-1/2 to 3 inches. Includes 13m speaker cable with matching terminals. Dynamic microphone/control head. Protected from salt-spray and water. Two thumb wheels for independent source and microphone volume. Push-to-talk switch and 3-position power switch. Includes 1m coiled cord with 5m straight portion. Main Amp. Pigtail leads for speaker output, power, ground and remote. Includes fixed, high-pass filter resonance. Mic input includes fixed compression and/or AGC and band pass filter. One preamp output/ remote trigger output to feed aux amp.
Get Price
Pair of brand new Boston Acoustics SPZ60 6.5" component speakers - These also are made for 6.75" 6" and 5x7" locations
Features:
Boston Acoustics SPZ60 6.5" Component Speaker System
Peak: 600 watts per set / 300 watts each
RMS: 300 watts per set / 150 watts each
Almost 1 full inch of excursion on the woofer!
Delivers more bass than standard sized speakers
360 Degrees rotation tweeter plane
Glass fiber composite woofer cone
Great midbass from factory locations
1.5" Voice Coils
Compact neo magnet structures
1" Type-M1 aluminum alloy dome tweeter with off-Axis AMDTM
Axis Mount, flush mount, surface mount, and angle mount tweeter mounting kits included
Adapter rings allow installation in 6 ½", 6", and 5 x 7" locations without customization
24dB system-specific crossovers with extrusion cases
3 ohms impedance will give you 50 % more power from almost any 4 channel car amp
Sensitivity: 90 dB
Frequency Response: 40 Hz - 22 Khz
Top-mount depth: 2-11/16"
Get Price
Pair of brand new Boston Acoustics SPZ50 5.25" component speakers
Features:
Boston Acoustics SPZ50 5.25" Component Speaker System
Peak: 600 watts per set / 300 watts each
RMS: 300 watts per set / 150 watts each
Almost 1 full inch of excursion on the woofer!
Delivers more bass than standard sized speakers
360 Degrees rotation tweeter plane
Glass fiber composite woofer cone
Great midbass from factory locations
1.5" Voice Coils
Compact neo magnet structures
1" Type-M1 aluminum alloy dome tweeter with off-Axis AMDTM
Axis Mount, flush mount, surface mount, and angle mount tweeter mounting kits included
24dB system-specific crossovers with extrusion cases
3 ohms impedance will give you 50 % more power from almost any 4 channel car amp
Sensitivity: 90 dB
Frequency Response: 50 Hz - 22 Khz
Top-mount depth: 2-9/16"
Get Price
This 2-way speaker system features Kicker 6.2 K-series coaxial 2-way speakers, combined with an innovative acoustically tuned thick-wall aluminum enclosure design. This aggressive combination of design and cutting edge features gives you outstanding performance and dependability. Water-resistant polygraphite cone material. 150-watt peak power handling (mid and tweeter). Titanium dome tweeter with Neodymium magnet. Acoustically tuned, thick-wall non-corrosive aluminum housing. Black powder-coated finish. Universal mount fits 1.5"-2.5" diameter tubes. Removes quickly and easily. Professional installation recommended; additional equipment may be required. Tower speakers are not compatible with bimini top.
Get Price
Pair of brand new Boston Acoustics Pro60 SE professional special edition 6.5" component speakers with special crossovers for extreme sound quality, and ability to handle a ton of power!
Features:
6-1/2" Boston Acoustics Competition Grade 2-Way Component System
Also fits 6 3/4" sand 5x7" speaker sizes (brackets included)
Pro series offers extreme power handling and incredibly clean sound
Peak Power : 500 watts per pair / 250 watts each
RMS Power : 250 watts per pair / 125 watts each
Copolymer cone woofer
Butyl surround type
1" Anodized alloy dome tweeters
Axis-, flush-, and surface-mount options
Dockable crossover with bi-wire and bi-amp options
Cast Aluminum Woofer Basket
Twin Stage And Radial Vent
VariMount Adapter Rings
3 ohms impedance will give you 50 % more power from almost any 4 channel car amp
1-1/2" High performance voice coil
Neodymium magnet
Grills included
Sensitivity: 90 dB
Frequency response: 50-22,000 Hz
Top-mount depth: 2-3/8"
Get Price
PAIR OF BRAND NEW RE AUDIO XXX6.5 COMP "6.5" 600 WATTS TOTAL (300 WATTS EACH) 2 WAY COMPETITION COMPONENET CAR SPEAKERS WITH NEO MAGNET + CAST ALUMINUM BASKET AND THE BEST SOUND QUALITY!
Features:
600 watts total system output peak
300 watts peak each
150 Watts RMS
Impedance: 2 Ohms
12dB/Octave Crossover Network
Rubber Surround
Size: 6.5" component set (2 Ohm) 12dB/Octave Crossover Network
High Grade Non-inductive Resistors
Tweeter Attentuation Control
6.5" Midbass Driver
Rubber Surround
Foamed Core Poly Cone
Cast Aluminum Basket
FEA Optimized Motor Structure
Split Coil Design
High Linearity Nomex Spider
Extreme Excursion
1" Silk Dome Tweeter
Powerful Neodymium Motor
Swiveling Flush Mount
2 Ohm
Made with some of the same components used to create the amazing XXX series of subs!
Get Price
Brand new Rockford Fosgate T2652-S 6.5" 400 Watt aluminum component car speakers
Features:
New Rockford Fosgate T2652-S 6.5" T2 Series aluminum component system
Peak Power Output: 400 watts per set (200 watts per side)
RMS Power Output: 200 watts per set (100 watts per side)
3 levels of tweeter attenuation
5% tolerance high quality poly-capacitors and air-core inductors
Aluminum dome neo-tweeter with integral suspension
Bi-amp on/off capability
Billet machined aluminum Phase plug
Butyl rubber surround
Carbon fiber & polypropylene injection molded cone
External audiophile grade component crossover
FlexFit basket design
DDC (Discrete Dual Clamp) Tweeter mounting provides easy installation
Multi-OEM Adapter allows the speaker to fit in certain OEM Openings
VAST (Vertical Attach Surround Technique) increases the radiating cone area
Billet machined aluminum phase plug
OEM adapter plate included
On-axis/off-axis tweeter configuration
Recessed tweeter mount uses standard 1-3/4" hole saw
Midrange Diameter: 6.5"
Midrange Depth: 2.51"
Tweeter Diameter: 1.0"
Tweeter Depth: .50"
Frequency Response: 55Hz - 22kHz
Crossover: High-Pass (HP): 3.0kHz @ 18dB/octave Butterworth
Low-Pass (LP): 3.0kHz @ 12dB/octave Butterworth
Sensitivity: 89dB @ 1 watt/1 meter
Get Price
5 ¼" component speaker system, butyl rubber surround, custom cast aluminum basket, 2-way crossover.
Get Price
Top Search
Last Search
